Adeept Ultrasonic Distance Sensor Starter kit for Raspberry Pi 3, 2 Model B/B+, LCD1602, Motor, C and Python Code

Adeept Ultrasonic Distance Sensor Starter kit for Raspberry Pi 3, 2 Model B/B+, LCD1602, Motor, C and Python Code is a kit suitable to experiment and integrate into solutions for home automation and the Internet of Things.

Adeept Ultrasonic Distance Sensor Starter kit for Raspberry Pi 3, 2 Model B/B+, LCD1602, Motor, C and Python Code, more information

• A detailed user manual/guidebook(PDF) with 18 lessons and two versions code(Python and C) are provided, it is esay for you to learn Raspberry Pi and C&Python programming.
• Raspberry Pi is NOT included.

Lessons:

• Raspberry Pi Pin Numbering Introduction
• Raspberry Pi GPIO Library Introduction
• How to Use wiringPi and RPi.GPIO
• Lesson 1 Blinking LED
• Lesson 2 Active Buzzer
• Lesson 3 Tilt Switch
• Lesson 4 Controlling an LED by Button
• Lesson 5 Relay
• Lesson 6 LED Flowing Lights
• Lesson 7 Breathing LED
• Lesson 8 Controlling an RGB LED with PWM
• Lesson 9 7-Segment Display
• Lesson 10 4-Digit 7-Segment Display
• Lesson 11 LCD1602
• Lesson 12 A Simple Voltmeter
• Lesson 13 Measuring Distance
• Lesson 14 Photoresistor
• Lesson 15 Thermistor
• Lesson 16 Controlling an LED Through LAN
• Lesson 17 DC Motor
• Lesson 18 How to Control A Servo

• 1x DC Motor
• 1x Servo
• 1x Relay
• 1x Ultrasonic distance sensor
• 1x Ultrasonic distance sensor holder
• 1x L9110 motor driver
• 1x LCD1602
• 1x ADC0832
• 1x 74HC595
• 1x 7-Segment Display
• 1x 4-bit 7-segment display
• 1x Light Sensor (Photoresistor)
• 1x Analog Temperature Sensor (Thermistor)
• 1x 40 pin GPIO Extension Board
• 1x 40 pin GPIO Cable
• 1x Breadboard Power Supply Module
• 1x Active Buzzer
• 1x Tilt switch
• 2x Switch
• 1x RGB LED
• 4x Red LED
• 4x Green LED
• 4x Yellow LED
• 4x Blue LED
• 16x Resistor(220Ω)
• 10x Resistor(1kΩ)
• 5x Resistor(10kΩ)
• 4x Capacitor (104)
• 2x Capacitor (10uF)
• 4x Button(large)
• 4x Button(small)
• 1x Button cap(red)
• 1x Button cap(white)
• 2x Button cap(blue)
• 2x NPN Transistor(8050)
• 2x PNP Transistor(8550)
• 2x 1N4148 Diode
• 2x 1N4001 Diode
• 2x Potentiometer(10KΩ)
• 1x Breadboard
• 40x Male to Male Jumper Wires
• 20x Male to Female Jumper Wires
• 1x Header(40pin)
• 1x Band Resistor Card
• 1x Project Box